Surround Sound Decoding; Digital Inputs (Optical, Coaxial) And Bluetooth; Analog Inputs (Left/Right Rca); Control Options - Paradigm Soundscape Manuel De L'utilisateur

SURROUND SOUND DECODING

Your Soundscape is capable of detecting and automatically
decoding multichannel audio formats, such as those found
on DVD and Blu-ray movies.
DIGITAL INPUTS (Optical and Coaxial)
When utilizing a digital connection, your Soundscape can
process the following formats:
• Dolby Digital
• DTS™ Digital Surround
• Digital PCM
• Digital Stereo

CONTROL OPTIONS

TOP PANEL CONTROLS
POWER ON/OFF & PREVIOUS SOURCE: Press and hold the
'Power' button for 3 seconds to turn unit on or off. Once
power is turned on, this button also controls navigation
to a 'Previous Source' selection. See Fig. 13 for a more
visual description.
VOL+ / VOL–: Adjusts volume level up or down Fig. 13.
MENU / NEXT SOURCE: Press this button to enter the menu
system. Once power is turned on, this button also controls
navigation to a 'Next Source'
more visual description.
PREVIOUS / NEXT SOURCE: Use the 'Next Source'
'Previous Source' buttons to cycle back and forth through
inputs (Fig. 13). The order of inputs is: Digital Optical 1
Optical 2 Digital Coaxial
ACCESSING THE MENU FROM THE TOP PANEL
To access the Menu, press and hold the top-panel 'Menu' button
for 3 seconds (Fig. 13). After the menu has been activated, the five
buttons on the top panel controls will function as 'Scroll Up'
'Scroll Down' / 'Scroll Left' / 'Scroll Right' directional
buttons allowing you to navigate the menu and press the
'Select' button to accept selections. Exit the menu by pressing
the 'Left' button or simply wait for the automatic time out.
MUTING THE SYSTEM: Cannot be done from the top
panel controls. Instead, use the remote control.
EN-15
selection. See Fig. 13 for a
and
Digital
Analog RCA Bluetooth.

ANALOG INPUTS (Left/Right RCA)

Digitally encoded sound information cannot be transmitted
to an analog input. This connection method is adequate for
most devices that only offer two channels of audio output
(i.e. VCRs, CD players, older game consoles or portable media
player docks). Although most surround-sound-capable
devices such as DVD and Blu-ray players offer analog and
digital connections, the digital connection should always be
employed. If a source device is connected via an analog left/
right RCA connection, the 5.1-channel encoded audio
content will not correctly send to the Soundscape.
Power Control
Power On/O
Volume &
Source Controls
Prev Source
Menu Controls
/
Select
Scroll Left
Fig. 13
Volume Up
Next Source
Volume Down
Scroll Up
Menu/
Scroll Right
Scroll Down