Menu Option: Stereo Mode; Menu Option: Bass Mode; Menu Option: Display; Menu Option: Anthem Room Correction - Paradigm soundplay Manuel Du Propriétaire

MENU OPTION: STEREO MODE

Stereo Mode: Enter the submenu by pressing the
enter button. Here, you may set how the soundbar
reproduces audio from 2-channel (stereo) sources.
Stereo Mode > Wide: This option configures
the soundbar to create a wider stereo image.
Activate by pressing the enter button, and the
soundbar will respond with 'Saved'.
Stereo Mode > Voice+: This option configures
the soundbar to reproduce the left and right
channels with a simulated center channel.
Activate by pressing the enter button and the
soundbar will respond with 'Saved'.
Stereo Mode > Normal (Default): This option
configures the soundbar to reproduce the
content using only the left and right channels.
Activate by pressing the enter button and the
soundbar will respond with 'Saved'.

MENU OPTION: BASS MODE

Bass Mode: Enter the submenu by pressing
the enter button. Here you may adjust the bass
equalization of the soundbar. These options can
also be activated directly from the soundbar's
remote control.
Bass Mode > Bass+: This mode enhances bass
output. Activate by pressing the enter button
and the soundbar will respond with 'Saved'.
Bass Mode > Normal (Default): This mode
returns the bass to normal levels. Activate by
pressing the enter button and the soundbar
will respond with 'Saved'.
Bass Mode > Night: This mode decreases bass
output. Activate by pressing the enter button
and the soundbar will respond with 'Saved'.
Paradigm Soundplay Manual 101816.indd 22

MENU OPTION: DISPLAY

Display: Enter the submenu by pressing the
enter button. The settings in this menu allow
you to adjust the brightness of the display and
configure the display to automatically turn on
and off.
Display > Bright: This option configures the
soundbar's display to be on at full brightness
when the soundbar is on. Activate by pressing
the enter button and the soundbar will respond
with 'Saved'.
Display > Dim: This option configures the
soundbar's display to be on at a reduced
brightness when the soundbar is on. Activate
by pressing the enter button and the soundbar
will respond with 'Saved'.
Display > Auto Bright (Default): This option
configures the soundbar's display to be on at
full brightness when a setting (such as volume
or input) is changed. After a few seconds, the
display will turn off. Activate by pressing the
enter button and the soundbar will respond
with 'Saved'.
Display > Auto Dim: This option configures
the soundbar's display to be on at a reduced
brightness when a setting (such as volume
or input) is changed. After a few seconds the
display will turn off. Activate by pressing the
enter button and the soundbar will respond
with 'Saved'.
MENU: ANTHEM ROOM CORRECTION
Anthem Room Correction: Enter the submenu
by pressing the enter button. Here you may
turn Anthem Room Correction on and off. Using
proprietary processes, a microphone, and the
power of your PC, the ARC system analyzes
22
2016-10-18 12:19 PM