Subwoofer Connection; No Subwoofer; Wired Subwoofer Connection; Wireless Subwoofer Connection - Paradigm soundplay Manuel Du Propriétaire

We recommend running cables directly from
the source components to the soundbar and
run a Digital Optical cable from the soundbar
to the TV to pass along the audio signal. This
allows the soundbar to receive multi-channel
encoded material. Depending on your number
of sources, the TV may be used for switching
some sources while the primary source devices
may be directly connected to the soundbar for
guaranteed multi-channel sound.
A few important points to remember when
connecting your soundbar:
• A Digital Optical connection will provide the
highest audio fidelity when connected to the
soundbar.
• If your soundbar is not producing sound or
surround sound from your Blu-ray player,
DVD player, or other multi-channel audio
capable source, you may need to set the
player's digital audio output to "Bitstream"
(also called "Raw", "Direct Digital", or "High
Bit Rate"). If "PCM" is selected you'll lose
the multi-channel encoded sound. Some
players only require you to turn PCM off to
configure for multi-channel encoded sound.
Please refer to your player's manual.
• Audio-only sources capable of only stereo
output (such as portable media player
docks or CD player) will often connect
directly to the soundbar via the Analog
Input.

SUBWOOFER CONNECTION

You may choose to employ a separate
subwoofer to reproduce the LFE (low frequency
effects) channel information in multi-channel
recordings and/or reinforce bass performance
of stereo recordings. A Paradigm subwoofer
or an alternative brand subwoofer can be
connected via the soundbar's "LFE Out" RCA
connection.
Paradigm Soundplay Manual 101816.indd 12
Additionally, this soundbar integrates a built-in
subwoofer wireless transmitter and includes a
subwoofer wireless receiver to simplify the
connection and placement of a subwoofer
within your room.
No Subwoofer (Default)
For systems not using a separate subwoofer,
use the soundbar's menu system and choose
"Subwoofer > No Sub". This sets the soundbar
to reproduce the entire frequency range when
playing content.

Wired Subwoofer Connection

Using a high-quality RCA style cable designed
for subwoofer connection, connect "Sub Out"
from the soundbar to the "LFE In/Sub In" on
the subwoofer.
Use the soundbar's menu system and choose
'Subwoofer > Wired Sub'.
Reference your subwoofer's manual to learn
how to properly adjust the sub's level and
phase controls to achieve proper blending
with the soundbar. The subwoofer's crossover
should be set to "bypass", "LFE". For sub-
woofers that do not have a "bypass" or "LFE"
crossover setting, we recommend adjusting the
crossover to its highest setting.

Wireless Subwoofer Connection

Press the subwoofer's sync button and hold
for 3 seconds. The subwoofer's LED will blink
quickly.
Use the soundbar's menu system and choose
'SUB > WIRELS > SYNC'. The soundbar will dis-
play 'PSH.BTN' [PUSH BUTTON].
If pairing has completed successfully, the sub-
woofer's LED will stop blinking and remain on
and the soundbar will display 'SYNCED'.
12
2016-10-18 12:19 PM