Paradigm soundplay Manuel Du Propriétaire page 21

AN OVERVIEW OF THE MENU STRUCTURE (CONTINUED)
|
–› Standby IP [configure Standby IP Control]
|
|
–› * Off [turns Standby IP Control off]
| |
†
– › On [turns Standby IP Control on, disabled if IP Control is off]
Learn [learn remote codes for second remote control]
|
–› Volume +
|
– › Volume –
|
– › Mute
|
| – › Next Input
– › Previous Input
|
– › Up
|
– › Down
|
– › Left
|
| – › Right
– › Enter
|
– › Bass Mode: Night
|
– › Bass Mode: Normal
|
– › Bass Mode: Bass+
|
– › Stereo Mode: Wide
|
– › Stereo Mode, Voice+
|
– › Stereo Mode: Normal
|
| – › Power Toggle
– › Power On
|
– › Power Off
|
– › Menu
|
– › Input: Optical 1
|
– › Input: Optical 2
|
– › Input: Analog 1
|
– › Input: Analog 2
|
| – › ARC On
– › ARC Of
|
– › Reset Remote [clear codes for second remote]
|
–› No [exits without clearing codes for second remote]
|
– › Yes [clears codes for second remote]
Source Name [assign custom names to inputs]
|
–› Bluetooth
|
– › Optical 1
|
– › Optical 2
|
– › Analog 1
|
– › Analog 2
Paradigm Soundplay Manual 101816.indd 20
Service [advanced controls]
|
–› Firmware [displays firmware versions]
| |
–› MCU [displays soundbar firmware version]
| |
– › DSP [displays DSP firmware version]
| |
– › IA3S4 [displays wireless subwoofer firmware version]
| |
– › TC390 [displays Tact button firmware version]
| |
– › IP Address [displays soundbar dynamic IP address]
| |
| | – › MAC MCU [display MAC address of soundbar MCU]
– › MAC LAN [display MAC address of soundbar LAN]
| |
– › MAC Wi-Fi [display MAC address of soundbar Wi-Fi.
|
– › Factory Reset [reset soundbar to original factory settings]
|
–› At Home [factory defaults for home use]
|
|
| | –› No [exits without resetting]
– › Yes [resets to factory defaults]
|
– › In Store [factory defaults for in-store use]
|
–› No [exits without resetting]
|
– › Yes [resets to factory defaults]
USB Upgrade (Mettre à niveau le micrologiciel)
|
–› Upgrade DSP [upgrades DSP firmware]
|
– › Upgrade TC390 [upgrades Tact firmware]
|
| – › Upgrade MCU [upgrades MCU firmware]
– › Upgrade ALL [upgrades all USB upgrades]
*HOME: Factory default setting, home use.
STORE: Factory default setting, retail store use.
†
20
2016-10-18 12:19 PM