Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed
here.
Tools needed
Level
Phillips screwdriver
Short Phillips screwdriver or a 90° screwdriver with a Phillips
screw bit
Tape measure
Slip-joint pliers
Pipe wrench
Adjustable wrench
IMPORTANT: Observe all governing codes and ordinances.
Product Dimensions
Freestanding Models
The freestanding model must have suitable drain systems in
accordance with local codes for the ice bin and sink drains.
A
A. 17¹⁄₄" (43.8 cm)
B. 30" (76.2 cm)
C. 36⁷⁄₈" (93.7 cm)
D. 26³⁄₈" (67.0 cm)
INSTALLATION REQUIREMENTS
Tools and Parts
Location Requirements
B
A
D
Parts supplied
Faucet
Cutting board
Ice bin covers
4 - Condiment bins with lids
Bottle cap container
Bottle container
Rear mounting flange and mounting screws (on built-in model
only)
Parts needed
NSF or UPC listed water connection lines or hose
All weather clear silicone
Built-In Models
A
C
Cabinet Dimensions (for built-in model)
Provide suitable drain systems in accordance with local codes for
ice bin and sink drains. The drains and filter must be accessible.
B
D
A. 26³⁄₈" (67.0 cm)
B. 30" (76.2 cm)
C. 10" (25.4 cm)
D. 22³⁄₄" (57.8 cm)
C
3
Publicité
Table des Matières
