Control Panel Locking; Cooking Advices; Pan Quality - Foster NFI 6830 Mode D'emploi

Control panel locking

To avoid modifying a setting of the cooking zones, in particular during cleaning, or to avoid
children accidentally turning on the appliance, the control panel can be locked (with exception to
the On/Off key [ 0/I ]).
•
Locking :
Action
Start
Hob locking
•
Unlocking :
Action
Start
In the 5 seconds after start :
Unlocking the hob

COOKING ADVICES

Pan quality

Adapted materials : steel, enamelled steel, cast iron, ferromagnetic stainless-steel,
Not adapted materials : aluminium and stainless-steel without ferromagnetic bottom,
The manufacturers specify if their products are compatible with induction technology.
To check if pans are compatible :
•
Put a little water in a pan placed on an induction heating zone set at level [ 9 ].This water
must heat in a few seconds.
•
Check if a magnet sticks to the bottom of the pan.
Certain pans can make noise when they are placed on an induction cooking zone. This noise
Control panel
press on key [ 0/I ]
press simultaneously [ P ] and [ 0 ]
from the right zone display
re-press on display [ 0 ]
Control panel
press on key [ 0/I ]
press simultaneously [ P ] and
[ L ] from the right zone display
press on key [ P ]
aluminium with ferromagnetic bottom.
cupper, brass, glass, ceramic, porcelain.
32
Wy wietlacz
[ 0 ] or [ H ] on displays
no modification
[ L ] on displays
Wy wietlacz
[ L ] on displays
[ 0 ] or [ H ] on displays
no light on the displays