Accessories; Mounting / Dismounting, Operating Position; Mounting On Mounting Plate - Pfannenberg CWB-ATEX Serie Instructions De Service

en

7.1.3 Accessories

7.2 Mounting / dismounting, operating position

Explosion hazard due to electrostatic discharge!
Non-compliance results in severe or fatal injuries.
Do not use the device in strong charge generating environments!
The following processes/activities should be avoided:
Explosion hazard due to inadequately protected device.
Non-compliance results in severe or fatal injuries.
i
Only mount the device in an upright (max. 45 ° inclined) position
(Do not mount upside down or on the ceiling)

7.2.1 Mounting on mounting plate

277896 / 6161622300
•
accidental friction
• particle currents
• The device must be mounted protected against impact.
Alternatively use the basket protector (available as an option).
12/2021
Operating instructions CWB-ATEX
Basket protector
Material: stainless steel wire
Order no.: 38108100200
(not applicable for 230 ac versions)
Compression gland
M20 x 1,5 ATEX de,  6...13 mm
Order no.: 38110000000
Stopping plug
M20 x 1,5 ATEX de
Order no.: 38108100010
DANGER
DANGER
• Mounting plate for lateral wall and / or bottom
assembly.
Page 9 / 14 30046-005l