Channel Set - Samsung DVD-VR355 Manuel D'instructions

DVD-Recorder

Channel Set

No Disc
Timer Rec.
Antenna
Antenna/Cable TV : Antenna
Cable TV
Setup
Auto Channel Memory
Channel Add/Delete
RF Output Channel : CH3
MOVE ENTER RETURN EXIT
Auto Channel Memory
Total channel numbers : 06/125
Saved channel :
4%
Stop
Channel Set
This feature allows you to manually set the DVD Recorder & VCR'
s tuner band to Antenna or Cable, whichever you connected to the
►
Antenna In jack during initial setup.
►
• Use this setting only if Auto Setup detected the incorrect tuner band, i.e.
►
► channels are coming in on the wrong channel numbers.
1. With the unit in Stop mode/No Disc mode, press the MENU button.
2. Press the ▲▼ buttons to select Setup, then press the ENTER or ►
button.
3. Press the ▲▼ buttons to select Channel Set, then press ENTER or ►
button.
4. Press the ▲▼ buttons to select Antenna/Cable TV, then press the
ENTER or ► button.
Select the Antenna or Cable TV(Signal Source) that matches the
antenna connection you selected on pages 15~17.
• Antenna : Select this if the DVD Recorder & VCR is connected to an
indoor or outdoor VHF/UHF antenna. (See pages 15, 17)
• Cable TV : Select this if the DVD Recorder & VCR is connected to a
cable TV. (See page 16)
Auto Channel Memory
Auto Channel Memory will automatically seek and store all active
channels in your area.
1. With the unit in Stop mode/No Disc mode, press the MENU button.
2. Press the ▲▼ buttons to select Setup, then press the ENTER or ►
button.
3. Press the ▲▼ buttons to select Channel Set, then press the ENTER
or ► button.
4. Press the ▲▼ buttons to select Auto Channel Memory, then press
the ENTER or ► button.
• The DVD Recorder & VCR will automatically search for all available
channels in the selected tuner band. This procedure may take a few
minutes to complete.
• When fi nished, the lowest channel will be displayed.
• If you want to stop or cancel scanning, press the ENTER button.
Then select 'YES'.
English - 30