Preparing The Remote Control - Samsung DVD-VR355 Manuel D'instructions

▌

Preparing the Remote Control

Install Batteries in the Remote Control
• Open the battery cover on the back of the remote
control.
• Insert two AAA batteries. Make sure that the polarities
(+ and -) are aligned correctly.
• Replace the battery cover.
If the remote control does not operate properly:
• Check the polarity +/- of the batteries.
• Check if the batteries are drained.
• Check if the remote sensor is blocked by obstacles.
• Check if there is any fl uorescent lighting nearby.
Dispose of batteries according to local environmental
regulations.
Do not put them in the household trash.
To determine whether your television is compatible,
follow the instructions below.
1. Switch your television on.
2. Point the remote control towards the television.
3. Press and hold the TV button and enter the two-fi gure
code simultaneously corresponding to the brand of your
television by pressing the appropriate number buttons.
Brand Codes
SAMSUNG 01,14,15,23,31 NEWSAN
DAEWOO 19
EMERSON 21
GRADIENTE 30
HITACHI 10
JVC 11
LG 06,08,18
LOEWE 28
MAGNAVOX 04
MITSUBISHI 13
Result: If your television is compatible with the remote
control, it will switch off.
It is now programmed to operate with the remote
control.
Brand Codes
27
NOBLEX 25
PANASONIC 12,24
RCA 07,29
SANYO 05,20
SHARP 02,16,22
SONY 03
TELEFUNKEN 26
TOSHIBA 09
ZENITH 17
English - 11
■ If several codes are indicated for your television
brand, try each one in turn until you fi nd one
that works. If you replace the remote control's
batteries, you must set the brand code again.
You can then control the television using the following
buttons.
Button Function
TV POWER Used to switch the television on and off.
INPUT SEL. Used to select an external source.
TV VOL +/- Used to adjust the volume of the television.
CH/TRK ( / ) Used to select the desired channel.
TV MUTE Used to toggle the sound on and off.
0~9 Used to input number directly.
100+ Used to select channels over 100.
■ The various functions may not be able to be
controlled on all televisions. If you encounter
problems, operate the television directly.