Samsung DVD-VR355 Manuel D'instructions page 39

DVD-Recorder System
No Disc
Timer Rec.
VCR
Video Input : AV 1
Setup
DVD EP Mode Time : 6 Hours
Chapter Creator : Off
Quick Recording Off : Off
Anynet+(HDMI-CEC) : On
On
MOVE ENTER RETURN EXIT
DVD-Recorder
System
No Disc
Timer Rec. VCR
Video Input : AV 1
Setup
DVD EP Mode Time : 6 Hours
Chapter Creator : Off
Quick Recording : Off
Anynet+(HDMI-CEC) : On
Off
On
MOVE ENTER RETURN EXIT
DVDR
View TV
Recording : TV
DVDR Menu
DVDR Operation
Receiver : Off
Setup
Move Enter
Exit
TV Menu
Quick Recording
It takes about 10 seconds for a disc to load (initialize) every time
you turn on the unit. To bypass this initialization process, you can
►
set the Quick Recording feature to On. This enables you to record
►
► immediately without having to wait for the disc to load.
►
►
1. With the unit in Stop mode/No Disc mode, press the MENU button.
►
2. Press the ▲▼ buttons to select Setup, then press the ENTER or ►
button.
3. Press the ▲▼ buttons to select System, then press the ENTER or ►
button.
4. Press the ▲▼ buttons to select Quick Recording, then press the
ENTER or ► button.
5. Press the ▲▼ buttons to select On, then press the ENTER or ► button.
■ The Quick Recording is set to Off as default.
■ If this function is set to on, power consumption Note will be
increased when the unit is powered off.
Anynet+(HDMI-CEC)
Anynet+ is a function that can be used to operate the recorder using
a Samsung TV remote control, by connecting the DVD Recorder &
►
VCR to a SAMSUNG TV using an HDMI Cable. (see page 18) (This is
►
only available with SAMSUNG TVs that support Anynet+.)
►
►
1. With the unit in Stop mode/No Disc mode, press the MENU button on
►
the remote control.
►
2. Select Setup using the ▲▼ buttons, then press the ENTER or ► button.
3. Select System using the ▲▼ buttons, then press the ENTER or ►
button. The system menu will be displayed.
4. Select Anynet+(HDMI-CEC) using the ▲▼ buttons, then press the
ENTER or ► button.
Anynet+(HDMI-CEC) items will be displayed.
5. Select On using the ▲▼ buttons, then press the ENTER or ► button.
For using Anynet+(HDMI-CEC)
1. Connect the recorder to a Samsung TV with an HDMI cable.
(See page 18)
2. Set the Anynet+(HDMI-CEC) to "On" on your DVD Recorder & VCR.
(see above)
3. Set the Anynet+ function on your TV.
(See the TV instruction manual for more information.)
• You can operate the DVD Recorder & VCR by using TV remote control.
( TV buttons that can be used to control the DVD Recorder & VCR :
, , ,
• When you press Anynet+ button on the TV's remote control, the OSD to
the left will appear.
- DVDR Menu : Same as MENU button (
VCR remote control.
- DVDR Operation : Same as ANYKEY button (
Recorder & VCR remote control.
■ By pressing the PLAY button of the recorder while watching TV, the
TV screen will change to the play screen.
■ If you play a DVD when the TV power is off, the TV will power On.
■ If you turn the TV off, the DVD Recorder & VCR will power off
automatically. (When the DVD Recorder & VCR is recording, it can't
be powered off.)
■ If you change HDMI to other sources (Composite, Component,
RF... etc) on your TV while playing a DVD disc, the DVD Recorder
& VCR will stop playing. The DVD Recorder & VCR may keep
playing certain discs based on their content.
English - 39
and buttons, ~ button)
) on the DVD Recorder &
,
) on the DVD