Before You Start - Samsung DVD-VR355 Manuel D'instructions

Recording the Current Channel you are
watching

Before you start

1. Check to make sure the antenna cable is connected.
2. Check the remaining time on the disc.
DVD-RAM/DVD±RW/+R discs should be formatted or initialized in
advance before beginning recording. (See page 56.)
3. Press the OPEN/CLOSE button to close the disc tray.
Wait until "LOAD" disappears from the front panel display.
1. Press the OPEN/CLOSE button and place a recordable disc on the
disc tray.
2. Press the OPEN/CLOSE button to close the disc tray.
Wait until "LOAD" disappears from the front panel display.
3. Press the CH/TRK ( /
channel you want to record.
4. Press the REC SPEED button repeatedly, to select the recording speed
(quality).
• XP(High, approx. 1 hour) → SP(Standard, approx. 2 hours) →
LP(Low, approx. 4 hours) → EP(Extended Play, approx. 6 hours/8hours)
5. Press the REC button.
• " " is displayed on the screen and recording begins.
6. Press the STOP button to stop or fi nish a recording in progress.
• The message "Updating the information of disc.
Please wait for a moment" is displayed.
Pausing / Resuming
• Press the REC PAUSE button to pause a recording in progress.
• Press the REC PAUSE button again during pause to resume recording.
• You can switch channels by pressing the CH/TRK (
recording pauses.
■ Recording will stop automatically if there is no free space left for
recording.
■ Up to 99 titles can be recorded onto a DVD-RAM/-RW/-R disc,
and up to 48 titles onto a DVD+RW/+R disc.
■ If the power is interrupted due to power failure or other reasons,
the title being recorded will not be saved onto the disc.
■ Recording will stop automatically if a copy protected image is
selected.
■ Do not use DVD-R authoring discs with this unit.
English - 58
) buttons or number buttons to select the
/ ) buttons while