EN
26
D. Repeat alarm (Days): Turn the TUNE button to select between „Daily/
Once" and confirm your selection with the ENTER/SNOOZE button.
If „Daily" is selected, the alarm icon will remain permanently on the
screen unless the alarm is disabled.
E. Alarm type (Mode): Turn the TUNE knob to select between DAB/FM/
BUZZER and press the ENTER/SNOOZE button to confirm.
F. Set alarm volume: Rotate the TUNE knob to the expected volume,
press the ENTER/SNOOZE button to confirm.
G. Off/Save: Rotate the TUNE knob to the desired function, press the
ENTER/SNOOZE button to confirm.
NOTES:
•
It is very importance to set the alarm to be ON position, and the alarm
symbol will be shown on the display.
•
Once the alarm has been set and activated, when the time on the clock
is the same as the alarm time that has been set, the unit will ring.
•
When the alarm clock is ringing, press the ENTER/ SNOOZE button to
activate the snooze function. 5 minutes later the alarm will ring again.
•
To turn off the alarm function permanently, follow the step G "Off/
Save" (in the section above) to set it to the Off position, the alarm is
now turned off and the alarm symbol disappears.
•
If a daily alarm has been set, the alarm symbol will remain on the
screen and the alarm will sound again on the next set day unless the
alarm has been turned off.
•
If you unplug the unit from the wall outlet, the time and alarm settings
will be cleared. You must reset both when you turn the power back on.
Sleep Mode
•
Press the SLEEP button, it will show "Sleep time off" on the screen. Then
üress the SLEEP button again to select the time interval after which the
unit will automatically enter sleep mode. You can select from 15, 30, 45,
60, 90 minutes. The time symbol will be displayed on the screen after
your selection.
•
To cancel the SLEEP function, press the SLEEP button, it will show the
current sleep time. Press the SLEEP button again, the time symbol will
disappear and "Sleep time off" is shown on the screen.