Basic Functions; Environmental Information - Philips MC165 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 13
Switching on
To switch the set on press STANDBY·ON on the set.
To switch the set to standby press STANDBY·ON again
(y on the remote control).
Demo mode
The demo mode displays various digital features of the set.
It can be activated during standby.
Activating and deactivating the demo mode
1 Keep STANDBY·ON on the set depressed for at least
5 seconds.
The demo mode is activated.
2 Press STANDBY·ON (y on the remote control).
The demo mode is deactivated.
Volume and sound adjustment
Adjust the volume by using VOLUME (VOLUME –/+ on the
remote control).
The volume level between VOL MIN and
VOL MAX is displayed.
Press DSC repeatedly to select the desired sound
characteristics.
JAZZ j, CLASSIC k, POP r or OPTIMAL is
displayed.
Press DBB to switch the bass enhancement on and off.
∂ is shown.
Press INCREDIBLE SURROUND (INC. SURR. on the remote
control) to switch the surround sound effect on and off.
i is shown.
Note: The effect of INCREDIBLE SURROUND may vary with
different types of music.
1 Press MUTE on the remote control to interrupt the sound
reproduction instantly.
Playback will be continued without sound.
2 Press MUTE on the remote control again to reactivate
the sound reproduction.

BASIC FUNCTIONS

Using additional appliances
It is possible to use an additional appliance, e. g. tape
recorder with the set. Look into the instruction manual of
the appliance on how to connect and operate it.
1 Insert the red plug of a cinch cable to the red socket
(AUX IN R) and the white one to the white socket
(AUX IN L).
2 Connect the other end of the cinch cable to the
additional appliance.
3 Press AUX to select the input for the appliance.
AUX is displayed.
4 Operate your appliance as usual and adjust volume and
sound with the set.
Note: It is not possible to use a turntable with AUX IN.

Environmental information

All redundant packing material has been omitted. We
have done our utmost to make the packaging easily
separable into three mono materials: cardboard (box),
polystyrene foam (buffer) and polyethylene (bags,
protective foam sheet).
Your set consists of materials which can be recycled if
disassembled by a specialized company. Please observe
the local regulations regarding the disposal of packing
materials, exhausted batteries and old equipment.
7

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Mc175

Table des Matières