Basic Functions; Switching On; Adjusting Volume And Sound; Using The Sound Control - Philips MZ-5 Mode D'emploi

XP MZ5/37 15-03-2002 11:23

Switching on

There are 3 ways to switch the set on:
MZ 3 CO MP
IO IO
IO IO
IO IO
II II
IO IO
II II
• press y STANDBY/ ON on the set and the
last selected source switches on;
• press SELECT SOURCE on the set and
the last selected source switches on;
• press CD, TUNER, CDR or AUX on the
remote control.
To switch the set to standby, press
y STANDBY/ ON once on the set
(y on the remote control).
– The volume level, interactive sound settings,
last selected source and tuner presets will be
retained in the set's memory.

Adjusting volume and sound

1 Turn the VOLUME control anti-clockwise to
decrease or clockwise to increase volume on the
set (or press VOLUME –, + on the remote
control).
Display shows the volume level VOL and a
number from 0-32.
2 Press DBB, INCR.SURR or DSC on the
remote control once or more to select the
desired sound effects:
,
DBB
and
(no indication) /
OPTIMAL
( ) /
CLASSIC
( ) /
POP OPTIMAL
Notes:
The effect of INCREDIBLE SURROUND may
vary with different types of music.
You can also select the desired sound effects
from the set
(See Using the SOUND CONTROL).
Pagina 11
AC T AU DIO
SY ST EM
OPEN OPEN
CLOSE CLOSE
CD
DBB
SHU FFLE
PRO GRA M
( ) /
JAZZ
... .

Basic functions

3 Press MUTE on the remote control to interrupt
sound reproduction instantly.
– Playback will be continued without sound and
the display shows MUTE.
4 To activate sound reproduction you can:
– press MUTE again;
– adjust the volume controls;
– change source.

Using the Sound Control

You can also adjust the sound settings exclusively
on the set:
1 Press SOUND CONTROL once or more to
select the various options:
• once:
display shows
DBB OFF
if DBB is activated, display shows
and ,
DBB
DBB ON
• twice:
display shows DSC status
(display shows ,
JAZZ
respective
, or symbol if selected)
• three times:
display shows Incredible Surround (IS) status
IS OFF.
If IS is activated, display shows IS ON and
.
2 For each sound setting, turn the VOLUME
control in any direction to select ON, OFF or
DSC options.
3 Press SOUND CONTROL again to confirm.
• Display shows the next sound setting to the
adjusted.
• After the IS setting is confirmed,the display
shows the volume level VOL briefly, before
returning to the current playback display.
;
.
OPTIMAL
, or and the
POP CLASSIC
11