Fm Radio Operation - Roadstar RCR-777UD+ Manuel D'instructions

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 16
1. Select your favourite station as explained before;
2. Press [AMS/MODE] button (11). "Preset Store" will appear on display;
3. Press [SKIP -/+] (5/6) to select the preset number;
4. Press [ENTER] (3) to confirm.
To recall a preset station press repeatedly the [PRESET] button (9).

FM RADIO OPERATION

1. Select "FM" mode by pressing the [FUNCTION] button (2);
2.
Adjust radio frequency to your desired station as follows:
MANUAL SCAN: Use the [SKIP -/+] buttons (5/6) to fine tune
a step of 0.05 MHz or press and hold the [SKIP -/+] buttons (5/6) to scan the next/
previous available station.
AUTO SCAN: Press & Hold [AMS] button (11) to start automatic scan.
PRESET
The PROGRAMMING operation is the same as that of DAB Preset.
Note: For a better reception, reorient the antenna (13).
TAPE OPERATION
1. Select "TAPE" mode by pressing the [FUNCTION] button (2);
2.
Press [STOP/EJECT] (15.2) to open the cassette door (12) and insert your tape;
3.
Close the cassette door (12);
4.
Press [PLAY](15.5) to start playing tape.
Press PAUSE (15.1) when you want to stop playing tape operation temporarily,
press again to resume tape operation.
Press STOP/EJECT (15.2) when finished,
Press F.FWD (15.3) or RWD (15.4) to
verse direction.
CD-MP3 OPERATION
1. Select "CD" mode by pressing the [FUNCTION] button (2);
2.
Open the CD door (14) and place a CD-MP3 disc with the label up in the CD com-
partment.
3.
Close the CD door (14). Focus search is performed and playback will start auto-
matically from the first track.
PROGRAMMING
Up to 20 tracks can be programmed for disc play in any order.
Stop the playback by pressing [STOP] (4);
1.
2.
Press [AMS/MODE] (11), the display (1) will show "P01" and flash;
3.
Select desired track by using [SKIP -/+] buttons (5/6);
4.
Press [AMS/MODE] (11) again to confirm desired track into the program
memory;
5.
Repeat step 3 and 4 to enter additional tracks into the program memory;
6.
When all the desired tracks have been programmed, press [PLAY] (3) to play the
disc in the order you have programmed;
English
press again to open the cassette door.
start rapid tape winding either forward or re-
your desired station
4
in

Publicité

Table des Matières
loading

Table des Matières