Bluetooth Operation - Roadstar HIF-1996D+BT Manuel D'instructions

5 English
LISTENING TO RECORDS
VERY IMPORTANT!
To prevent damages from transportation, a transit screw is located at the upper right side of
the turntable platform. Before start playing, use a screwdriver and turn the transit screw in
clockwise direction (screw going down) completely. In case of transportation, remember to
clock again this screw in counter-clockwise direction to prevent damages.
1. Press MODE (8) (5 on remote) repeatedly to select PHONO mode.
2. Open the Record Player Cover. Release the Tonearm Clamp, and remove the stylus pro-
tector. Place a record on the turntable, over the central spindle. Place the EP adapter
over the central spindle when playing 17cm EP records.
3. Set 33/45/78 RPM SPEED SELECTOR (32) to 33 / 45 / 78 rpm according to the record.
4. Lift the Tonearm with the Tonearm Lift Lever. Move the tonearm to the beginning of the
record, or to the start of a particular track. Gently lower the tone arm onto the record with
the Tonearm Lift lever to start playing.
5. When the record is finished the tonearm will automatically stop and return automatically
to the rest. To stop manually, lift the tonearm from the record and return it to the rest.
6. Moving or jarring the turntable without securing the Tonearm clamp could result in dama-
ge to the Tonearm. Replace the protective cap on the stylus when not in use.
AUX-IN
This unit provides an auxiliary audio input jack for connecting external audio device like MP3
players, CD players and allow playback of your external source through the system speakers.
1. Use an audio cable (not included) with a RCA stereo plugs on one end of the cable. Plug
one end into the AUX-IN jack on the main unit and plug the other end of the cable into
the LINE OUT or HEADPHONE Jack of your external audio device.
2. Turn ON the unit and your external audio device. Press MODE (8) (5 on remote) repea-
tedly to select CD mode.
3. Start to play the external device (see the user manual of the external device).

BLUETOOTH OPERATION

1. Press BT (9) to select BLUETOOTH function. "BT" will be shown on the display.
2. Select from your portable device (Smartphone, Tablet...) the ID Bluetooth tagged as HIF-
1996D+BT, then confirm connection.
3. When the pairing is successful the LED will stop blinking.
4. Now you can transfer the music to the HIF-1996D+BT and all operations can only be
operated from your mobile device.
PLAYBACK FROM USB
1. Insert the USB device's plug into the USB socket.
2. Press MODE (8) (5 on remote) repeatedly to select USB mode.
3. The unit will start reading the device automatically after the connection.
4. Use the same procedure as CD to listen to your USB device.
DELETE USB
1. During playback, press and hold REC (18) (4 on remote). "DEL" will be shown on the di-
splay.
2. Press SKIP -/+ (16/17) (12/13 on remote) repeatedly to select between ONE/FOLDER/
ALL.
3. Press REC (18) (4 on remote) again to confirm.