Abus Security-Center Ecoline TV7100 Instructions D'installation page 21

All manuals and user guides at all-guides.com
(3) Backlight compensation (BLC)
To activate backlight compensation, insert a wire jumper between PIN (3) and
the earth PIN (4).
(4) Earth connection
This PIN returns an earth potential.
(5) Auto-electronic shutter (AES)
To activate the auto-electronic shutter of the camera, insert a wire jumper
between PIN (5) and the PIN for the 3.3V potential (6).
(6) 3.3V voltage potential
This PIN returns a 3.3V voltage potential.
(7) & (8) Not used
(9) Auto gain control
To activate auto gain control, insert a wire jumper between PIN (9) and the 3.3V
potential PIN (6).
(10) Flickerless – not required in Europe
17