Pre-Operation Safety Inspection - Upright X26 Ultra Narrow Guide De L'opérateur

Pre-Operation Safety Inspection

P -O
RE PERATION
NOTE: Carefully read, understand and follow all safety rules, operating instructions, labels, and National Safety
Instructions/Requirements. Perform the following steps each day before use.
1. Open modules and inspect for damage, fluid leaks or missing parts.
2. Check the level of the hydraulic fluid with the platform fully lowered. See "Hydraulic Fluid" on page 16.
Add recommended hydraulic fluid if necessary. See "Specifications" on page 22.
3. Check that fluid level in the batteries is correct. See "Battery Maintenance" on page 16.
4. Verify that the batteries are charged.
5. Check that the A.C. extension cord has been disconnected from the charger plug.
6. Check that all guardrails are properly in place and secured.
7. Inspect the machine thoroughly for cracked welds, loose or missing hardware, hydraulic leaks, dam-
aged cables or hoses, loose wire connections and wheel bolts.
Page 6
All manuals and user guides at all-guides.com
S I
AFETY NSPECTION
114100-020 X26 Ultra Narrow - Operator Manual