Pre-Operation & Safety Inspection; Engine Inspection; System Function Inspection - Upright SL26SL Guide De L'opérateur

060588-026 SL26/30SL
P -O
RE PERATION
NOTE: Carefully read, understand and follow all safety rules, operating instructions, labels and National Safety
Instructions/Requirements. Perform the following steps each day before use.
1. Remove module covers and inspect for damage, fluid leaks or missing parts.
2. Check the level of the hydraulic fluid with the platform fully lowered. Fluid should be visible in the sight
gauge. Add hydraulic fluid, if necessary ( see Specifications).
3. Check that the fluid level in the battery is correct ( see Battery Maintenance, page 13).
4. Carefully inspect the entire work platform for damage such as cracked welds or structural members,
loose or missing parts, fluid leaks, damaged cables or hoses, loose connections and tyre damage.
5. Check that all guardrails are securely in place with all fasteners properly torqued ( see Specifications ).
6. Pull chassis emergency stop button out to ON position.
C A U T I O N
!
DO NOT check coolant when engine or radiator is hot; hot coolant can cause severe burns.
E
N G I N E
1. Check fuel supply.
2. Check engine oil level with dipstick.
3. While the engine is cool, check the radiator coolant level. DO NOT check coolant when the engine or
radiator is hot.
S F
YSTEM UNCTION
W A R N I N G
!
STAND CLEAR of the work platform while performing the following checks.
Before operating the work platform, survey the work area for surface hazards such as holes, drop-offs,
bumps and debris.
Check in ALL directions, including above the work platform, for obstructions and electrical conductors.
Protect control console cable from possible damage while performing checks.
Page 6
All manuals and user guides at all-guides.com
& S
AFETY
I
N S P E C T I O N
I
NSPECTION
I
NSPECTION
Hydraulic Tank
Sight Gauge
Emergency
Lowering Valve
!
!
Pre-Operation & Safety Inspection
Figure 3: Control Module, Chassis left side
Chassis
Emergency Stop
Switch
Chassis Lift Switch
Operator Manual