Transporting The Machine; Lifting By Crane; Moving By Forklift - Upright X26 Ultra Narrow Guide De L'opérateur

Transporting the Machine

T
RANSPORTING THE
Always use a transport vehicle when moving a machine to a work site. Towing the machine over long dis-
tances will damage the machine and void the warranty.
L
I F T I N G
D A N G E R
!
See specifications for the weight of the machine
and be certain that the crane is of adequate
capacity to lift the machine.
Secure straps to chassis tie down/lifting points
only (see Figure 7).
M
O V I N G
D A N G E R
!
Fork-lifting is for transport only.
See specifications for the weight of the machine
and be certain that the forklift is of adequate
capacity to lift the machine.
Forklift from the rear of the machine using the
forklift pockets provided. If necessary, the
machine may be forklifted from the side by lifting
under the Chassis Modules (refer to Figure 8).
FRONT
Front Tie Down/Lift
Point
Page 12
All manuals and user guides at all-guides.com
M
ACHINE
B C
Y R A N E
!
B F
Y O R K L I F T
!
Forklift Here
Front
Figure 8: Tie Down and Lift Points
Rear Tie
Down/Lift Point
REAR
114100-020 X26 Ultra Narrow - Operator Manual
Figure 7: Secure Crane Straps
Rear
Rear Tie
Down/Lift Point
Forklift Pockets