Installation And Operation; Installation - Bartscher Contessa Duo Mode D'emploi

5. Installation and operation

5.1 Installation

Positioning
•
Unpack the device and remove all packing material.
CAUTION!
Never remove the rating plate and any warning signs from the device.
•
Place the device on top of an even, stable, dry, and water-resistant surface which
supports the weight of the device and is not heat sensitive.
•
Never place the device at the edge of a table to avoid accidents.
•
Never place the device in humid or wet environment.
•
Never place the device on the flammable surfaces.
•
Place the device so that the plug is easily accessible and can be quickly removed
from its socket in case of necessity.
Connection
DANGER! Electric shock hazard!
The device can cause injuries due to improper installation!
Before installation and connecting the local power grid
specification should be compared with that of the device (see
rating plate). Connect the device only in case of compliance!
Connect the device only to properly installed single socket
with protective terminal.
•
The electrical circuit in the socket must be secured to at least 16A. Only connect the
device directly to the wall socket; do not use any extension cords or power strips.
- 29 -