Topcom Fidelity SMS Manuel D'utilisateur page 13

All manuals and user guides at all-guides.com
HL_FidelitySMS.book Page 13 Monday, August 4, 2003 3:38 PM
• Use the scroll switch to select the 'Send SMS?'.
• Press OK
• Edit, if necessary, the desired telephone number + terminal number (if allowed)
• Press OK, the display shows ' Send?'
• Press OK to confirm. Wait until the display indicates that the message has been sent.
c. Forward a received message
You have the possibility to forward the received message to other users.
After selecting the message (9.2.4. a):
• Use the scroll switch to select 'Forward'.
• Press OK
• Edit the Short Message by using the Alphanumerical keypad (see 7.1)
• Press OK
• Use the scroll switch to select the 'Send SMS?'.
• Press OK
• Edit the telephone number + terminal number (if allowed)
• Press OK, the display shows ' Send?'
• Press OK to confirm. Wait until the display indicates that the message has been sent.
d. Calling the telephone number of the received message
You have the possibility to call the sender.
After selecting the message (9.2.4. a):
• Use the scroll switch to select 'Return Call'.
• Press OK
• The telephone number will be dialed automatically in handsfree.
e. Storing the telephone number of the received message.
You have the possibility to store telephone number of the sender in the phonebook.
After selecting the message (9.2.4. a):
• Use the scroll switch to select 'Save number?'.
• Modify the number if necessary or press the OK to confirm. The name is shown on the display
(if sent by the Caller-ID).
• Enter the name by means of the alphanumerical keypad and press OK to confirm.
• Use the scroll switch to select 'Save Phonebook?
• Press OK to confirm and wait until the number is stored.
f. Erasing received message out of the Outbox
After selecting the message (9.2.4. a):
• Use the scroll switch to select 'Clear?'.
• Press OK
• Wait until the display indicates that the message has been deleted. The next message is displayed.
9.3 Protocol 2
9.3.1 SMS Settings
Before using the SMS function, you have to change the next settings:
• Nr. SMS Out : Contains the telephone number of the SMS center. This number is needed to send SMS messages
towards the server.
• Nr. SMS In : When the SMS center sends you a new message, its telephone number is send together with the
message. With this information, the telephone knows that it is an incomming SMS.
• Terminal Number : If more SMS devices are on the same telephone line, you can give each device another
terminal number (1-9), so that SMS messages can be send to each device separately. (Default '1')
• Password protected mailboxes: Sent or received messages will be stored in a public or in a personal mailbox.
The Fidelity SMS supports 3 personal mailboxes which are password protected. To reach a personal mailbox, the
sender has to add a Public Key (5 characters) to its message. In case that no public key have been added, all
messages will be stored in the public mailbox.
The settings are different per country and operator. Please check the extra sheet added in this manual for different
countries (ADDENDUM) or contact your local networkoperator.
a. Setting the Service Center number for outgoing SMS.
• Press the Menu button .
• Use the scroll switch to select the 'Setting'.
Topcom Fidelity SMS 13