Running The Model In; Operating Instructions - Roco 95 Serie Manuel

▪ Running the model in

Before use advisable to let the loco go around about 30 forwards and 30 minutes backwards without load, to obtain an optimal circuit and
best tractive powermalen.

▪ Operating instructions

?
Only for showcase
The smallest radius this model should run is R2 (358 mm) of the ROCO track system (model
without tubes protecting pistons).
Your locomotive will run smoothly on clean tracks only. For this purpose we recommend
using item no. 46400, Roco track cleaning van, or item no. 10002, Roco track cleaning
rubber, for removing heavy dirt.
?
Optional
31