Wall Mounting; Connect Speakers; Connect Power - AEG MC 4429 CD Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 50
All manuals and user guides at all-guides.com

Wall Mounting

Mount Desk Stand

Connect Speakers

Connect Power

Level the drilling template horizontally and mark the drill holes for
wall mounting.
Drill the holes with a 6mm drill bit.
Insert the wall plugs to the drill holes.
Screw in the fastening screws, but let them stand out approx.
4mm.
Hang up device and speakers.
Attach device and speakers to the corresponding desk stands and
fasten with the supplied screws.
Connect the speakers to SPEAKERS R/L (28).
Follow these instructions for mains power connection for safe and
trouble-free operation:
Ensure that the mains cable is undamaged; do not rout the cable
over hot surfaces or sharp edges.
Do not tension the mains cable.
Connect the device to a properly installed wall outlet. The standby
LED lights up and the time (0:00) is shown on the display.
English
145

Publicité

Table des Matières
loading

Table des Matières