Bosch GHO 10-82 Professional Notice Originale page 41

Masquer les pouces Voir aussi pour GHO 10-82 Professional:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 87
All manuals and user guides at all-guides.com
OBJ_BUCH-447-001.book Page 41 Monday, October 8, 2007 11:18 AM
Carry out the planing procedure several times un-
til the requested rebating depth is reached.
Guide the planer applying sideward supporting
pressure.
Beveling with the Beveling Guide
When beveling rebates
and surfaces, adjust the
required slope angle
with the angle adjust-
ment 26.
Maintenance and Service
Maintenance and Cleaning
Before any work on the power tool itself,
pull the mains plug.
For safe and proper working, always keep the
power tool and the ventilation slots clean.
Ensure easy operation of the park rest 29 and
clean it regularly.
When the carbon brushes wear below acceptable
service tolerances, the machine will automatical-
ly cut out. The machine must be sent to customer
service for maintenance (addresses, see "Service
and Customer Assistance" section).
If the power tool should fail despite the care tak-
en in manufacturing and testing procedures, re-
pair should be carried out by an after-sales ser-
vice center for Bosch power tools.
In all correspondence and spare parts orders,
please always include the 10-digit article number
given on the type plate of the power tool.
Replacing the Drive Belt (see figures P–Q)
Unscrew screw 6 and take off the belt cover 7.
Remove the worn drive belt 30.
Before assembling a new drive belt 30, clean
both pulleys 31 and 32.
Place the new drive belt 30 on the small pulley 32
first and then work the drive belt 30 onto the
large pulley 31 by hand while rotating it.
Make sure that the drive belt 30 runs exactly in
the longitudinal grooves of the pulleys 31 and 32.
Bosch Power Tools
Reattach the belt cover 7 and tighten with the
screw 6.
After-sales service and customer assis-
tance
Our after-sales service responds to your ques-
tions concerning maintenance and repair of your
product as well as spare parts. Exploded views
and information on spare parts can also be found
under:
www.bosch-pt.com
Our customer consultants answer your questions
concerning best buy, application and adjustment
of products and accessories.
In case of a claim, repair or purchase of replace-
ment parts or in case of queries or other prob-
lems, please contact your local dealer or Bosch
representative.
People's Republic of China
Website: www.bosch-pt.com.cn
China Mainland
Bosch Power Tools (China) Co., Ltd.
567, Bin Kang Road
Bin Jiang District 310052
Hangzhou, P.R.China
Service Hotline: 800 8 20 84 84
Tel.: +86 (571) 87 77 43 38
Fax: +86 (571) 87 77 45 02
HK and Macau Special Administrative Regions
Melchers (H.K.) Ltd, Room 1210
Shun Tak Centre, West-Tower
168 – 200 Connaught Road, Central Hong Kong
Customer Service Hotline: +852 (25) 89 15 61
Fax: +852 (25) 48 79 14
E-Mail: bosch@melchers.com.hk
Indonesia
PT. Multi Tehaka
Kawasan Industri Pulogadung
Jalan Rawa Gelam III No. 2
Jakarta 13930
Indonesia
Tel.: +62 (21) 4 60 12 28
Fax: +62 (21) 46 82 68 23
E-Mail: sales@multitehaka.co.id
www.multitehaka.co.id
1 609 929 M02 | (8.10.07)
English | 41

Publicité

Table des Matières
loading

Table des Matières