Bosch GHO 10-82 Professional Notice Originale page 14

All manuals and user guides at all-guides.com
OBJ_BUCH-447-001.book Page 14 Monday, October 8, 2007 11:18 AM
14 | English
When the carbon brushes wear below acceptable
service tolerances, the machine will automatical-
ly cut out. The machine must be sent to customer
service for maintenance (for address, see the "Af-
ter-sales service and customer assistance" sec-
tion.
If the machine should fail despite the care taken
in manufacturing and testing procedures, repair
should be carried out by an after-sales service
centre for Bosch power tools.
In all correspondence and spare parts order,
please always include the 10-digit article number
given on the type plate of the machine.
WARNING! Important instructions for connect-
ing a new 3-pin plug to the 2-wire cable.
The wires in the cable are coloured according to
the following code:
Do not connect the blue or brown wire to the
earth terminal of the plug.
Important: If for any reason the moulded plug is
removed from the cable of this power tool, it
must be disposed of safely.
Replacing the Drive Belt (see figures P–Q)
Unscrew screw 6 and take off the belt cover 7.
Remove the worn drive belt 30.
Before assembling a new drive belt 30, clean
both pulleys 31 and 32.
Place the new drive belt 30 on the small pulley 32
first and then work the drive belt 30 onto the
large pulley 31 by hand while rotating it.
Make sure that the drive belt 30 runs exactly in
the longitudinal grooves of the pulleys 31 and 32.
Reattach the belt cover 7 and tighten with the
screw 6.
1 609 929 M02 | (8.10.07)
After-sales service and customer assist-
ance
Our after-sales service responds to your ques-
tions concerning maintenance and repair of your
product as well as spare parts. Exploded views
and information on spare parts can also be found
under:
www.bosch-pt.com
Our customer consultants answer your questions
concerning best buy, application and adjustment
of products and accessories.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
Tel. Service: +44 (0844) 736 0109
Fax: +44 (0844) 736 0146
E-Mail: SPT-Technical.de@de.bosch.com
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: +353 (01) 4 66 67 00
Fax: +353 (01) 4 66 68 88
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: +61 (01300) 307 044
Fax: + 61 (01300) 307 045
Inside New Zealand:
Phone: +64 (0800) 543 353
Fax: +64 (0800) 428 570
Outside AU and NZ:
Phone: +61 (03) 9541 5555
www.bosch.com.au
Bosch Power Tools