Technical Data; Emergency Procedure - Güde GRH 360 Traduction Du Mode D'emploi D'origine

All manuals and user guides at all-guides.com

Technical Data

Movable car lifter GRH 360
Art. No ................................................................................18015
Max. lifting capacity ......................................... 2000 kg
Smallest vertical clearance ............................125 mm
Pump lever length ............................................460 mm
Max. lifting height ............................................360 mm
Dimensions LxBxH Upper lever, bottom handle
............................................................. 500x215x140 mm
Weight .....................................................................10,5 kg
Read and understand the operating instructions
before using the appliance. Abide by all the safety
measures stated in the service manual. Act responsib-
ly toward third parties.
In case of any doubts about connection and operation
refer please to our customer center
Specifi ed Conditions Of Use
The movable lifter may only be used as lifting equipment.
Never move or carry load using the lifter. Fit a bracket
immediately after load lifting. Never load the car lifter
more than the specifi ed capacity. The manufacture cannot
be held liable for any damage in case of failure to comply
with the provisions of the generally applicable regulations
and provisions of this manual.Do not use this product
in any other way as stated for normal use. Respecting
technical data and safety precautions.Not observing
general regulations in force and instructions from this
manual does not make the manufacturer liable for
damages.
Power tool description
1. Lift rod
2. Carrying handle
3. Lifting plate
4. Lift arm
5. Transport wheels
6. Steering wheel
7. Bleed valve
8. Oil fi ller
9. Cover plate
10. Return spring
Residual risks
Danger of injury !
Staying under lifted load is strictly prohibited.
There may still be some risk when operating the
equipment despite compliance with all applicable
building regulations.

Emergency procedure

Conduct a fi rst-aid procedure adequate to the injury
and summon qualifi ed medical attendance as quickly
as possible. Protect the injured person from further
harm and calm them down. For the sake of eventual
accident, in accordance with DIN 13164, a workplace
has to be fi tted with a fi rst-aid kit. It is essential to
replace any used material in the fi rst-aid kit immedia-
tely after it has been used.
If you seek help, state the following pieces of infor-
mation
1. Accident site
2. Accident type
3. Number of injured persons
4. Injury type(s)
Requirements for operating staff
The operating staff must carefully read the Opera-
ting Instructions before using the appliance.
Qualifi cation Apart from the detailed instructions by
a professional, no special qualifi cation is necessary
for appliance using.
Minimum age Persons over 16 years of age can
only work on the appliance. An exception includes
youngsters trained in order to reach knowledge
under supervision of the trainer during occupational
education.
Training Using the appliance only requires corre-
sponding training by a professional or the Operating
Instructions. No special training is necessary.
The operator is responsible for accidents or risks to third
parties.
Symbols
Warning/caution!
Read the Operating Instructions!
Wear protective gloves !
ENGLISH
17