Güde GRH 360 Traduction Du Mode D'emploi D'origine page 18

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 21
ENGLISH
18
Wear safety shoes with steel reinforcement!
Never load the car lifter more than the
specifi ed capacity.
Protect against humidity
Never expose tool to rain.
Do not stand on the device and do not try
to ride it.
Protect against humidity
Protect against frost
Warning against risk of tripping
Keep bystanders in safe distance from the
appliance (at least 5m)
Warning against hand injury / bruising
Protect against humidity
This side up
Generallye Safety instructions
Warning
Read all safety warnings and all instructions.  Failure to
follow the safety instructions and warnings may result in
serious injuries. Save all warnings and instructions for
future reference.
The appliance must not be used if damaged or safety
equipment is defective. Replace any worn-out and
damaged parts.
1) Work area safety
a) Keep work area clean and well lit.  Cluttered or dark
areas invite accidents.
b) Distractions can cause you to lose control.
c) Keep children and other persons including animals
in a safe distance when using the appliance.
d) Do not overreach. Keep proper footing and balance
at all times. 
e) Abide by all the safety measures stated in the service
manual. Act responsibly toward third parties.
All manuals and user guides at all-guides.com
2) Residual risks and protective measures
a) Limbs may be crushed when lowering the load. Do
not touch and step under the lift arm when lowering
the car lifter.
3) Service
a) Have your device repaired only by qualifi ed profes-
sional staff using original spare parts.This will ensure
that the safety of the power tool is maintained.
Safety instructions Movable car lifter
Never load the movable car lifter above its
capacity.
The appliance must not be used if damaged
or safety equipment is defective. Replace any
worn-out and damaged parts.
The lifter has only been designed to lift load.
Make sure the bleeder screw is screwed fi rmly
before lifting load.
Put the lifter on a solid, fi rm and fl at surface
when lifting load.
Never work under lifted load that is
supported only by the lifter. Lifted load must
be secured / supported by separate trestles
or, as appropriate, brackets.
It is only possible to work on and under
lifted vehicles when they are suffi ciently
secured and supported to make sure: they do
not turn over and slip.
Vehicles to be lifted need to be suffi ciently
secured against rolling away before they are
actually lifted. Never place the lifter askew or
slantwise to the lifting plane.
Make sure nobody is leaning against the vehicle
when it is lifted.
Fix the lifter to the vehicle only at locations
specifi ed by the manufacturer.
Moving lifted load may lead to lifter damage
and failure. Never move load using the car
lifter.
Make sure nobody is leaning against lifted
vehicle or lifted load.
The lift rod or car lifter itself may be a tripping
hazard.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

18015

Table des Matières