Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
7
Anomalies and solutions
You may resolve certain little problems yourself:
The oven is not heating. Check that the oven is
correctly connected and that your installation's fuse
is not out of service. Increase the selected
temperature.
The oven light is not working. Replace the bulb
or the fuse. Check that the oven is correctly
connected.
The cooling fan continues to operate after the
oven stops. This is normal; the fan may continue
running until a maximum of 1 hour after cooking to
lower the temperature inside and outside the oven.
If the fan runs for over an hour, contact the After
Sales Department.
The pyrolysis cleaning cycle does not begin.
Check that the door is locked. If there is a door
locking or temperature sensor fault, contact the
Customer Services Department.
flashes in the display. Door
The symbol
locking fault; contact the Customer Services
Department.
8
CARE FOR THE ENVIRONMENT
- This appliance's packing materials are recyclable.
Please recycle them and help protect the environ-
ment by depositing them in municipal containers pro-
vided for this purpose.
- Your appliance also contains many recy-
clable materials. It is therefore marked
with this logo to indicate that used appli-
ances must not be mixed with other waste.
The appliance recycling organised by your manufac-
turer will therefore be conducted in optimum condi-
tions, in accordance with European directive
2002/96/EC on electrical and electronic equipment
waste.
Consult your local authority or your retailer to locate
your nearest used appliance drop-off points.
- We thank you for your help in protecting the envi-
ronment.
Environment
9
SERVICE CALLS
Any repairs made to your appliance must be
carried out by a qualified professional authorised
to work on the brand. When calling, please
provide
the
complete
appliance
(commercial
reference, serial number), so that we can handle
your call better. This information appears on the
manufacturer's nameplate attached to your
equipment.
B: Commercial reference
C: Service reference
H: Serial number
GENUINE REPLACEMENT PARTS
During maintenance work, request that only certified
genuine replacement parts are used.
ENGLISH
Service Calls
references
of
your
reference,
service
Publicité
Table des Matières
