Operation Guide; Raising The Overbed Table; Lowering The Overbed Table - Stryker 4810 Manuel D'utilisation Et D'entretien

English

RAISING THE OVERBED TABLE

To raise the overbed table, either:
• Lift up on the underside of the activation lever as shown in Figure 1 or
• Lift up on the provided handle as shown in Figure 2.
WARNING
Use caution when raising and lowering the overbed table to avoid pinching your fingers between the activation lever and
release cover.
Figure 1: Lift Up on Activation Lever

LOWERING THE OVERBED TABLE

To lower the overbed table, push down on the activation
lever as shown in Figure 3.
WARNING
• Do not lean on table. Leaning on table may cause the
table to tip which may result in injury to the individual
or damage to the unit.
• Do not sit on table. Sitting on table may cause the
table to tip which may result in injury to the individual
or damage to the unit.
Return To Table of Contents
1-8

Operation Guide

Figure 3: Push Down on the Activation Lever
4810-009-001 REV C
Figure 2: Lift Up on Handle
www.stryker.com