Heidolph Hei-FLOW Core Notice D'instructions page 78

Attachments
Pump head SP quick
The SP quick pump head is attached directly to the pump housing using the supplied
screws.
Mounting SP quick
➜
Place the pump head on the pump drive
so that the adaptor coupling of the
pump head slides into the coupling on
the pump drive (if necessary, move the
rotor slightly back and forth).
➜ Secure the pump head to the pump
housing using the knurled screws.
Tighten the knurled screws evenly with
a suitable tool
➜
Place the clamping lever from right to
left to open the tube guide.
79