Heidolph Hei-FLOW Core Notice D'instructions page 77

Attachments
Mounting SP standard and SP vario
➜ Insert the guide element into the
flange.
➜ Position the flange with the guide
element on the pump drive so that the
guide element is centered around the
pump head coupling.
– Make sure that the Allen screw is
facing upwards!
➜
Secure the flange to the pump drive on
both sides with the knurled screws.
➜
Pull the guide element out of the
flange.
➜
Remove the protector from the pump
head.
➜
Fully insert the coupling of the pump
head into the flange (if necessary, move
the rotor slightly back and forth).
➜ Align the pump head - according to the
the vessel arrangement - and secure it
with the Allen screw.
➜ Mount the protector.
78