Specifications; Analog Output - Classe CDP-100 Manuel Du Propriétaire

26
All manuals and user guides at all-guides.com
Specifications
Classé Audio reserves the right to make improvements without notice.
■ Frequency response
■ Signal-to-noise ratio
■ Channel separation
■ Distortion (THD + noise)
■ Maximum output voltage (0dBFS signal)

■ Analog output

■ Digital output (S/PDIF)
■ Digital-to-analog conversion
■ Analog filter
■ Clock jitter
■ Sample rate
■ Formats supported
■ Rated power consumption
■ Idle power consumption
■ Mains voltage
(cannot be changed by user or dealer).
■ Dimensions (not incl. controls or connectors)
■ Net weight
■ Shipping weight
For more information, see your Classé dealer or contact:
Classé Audio
5070 François Cusson
Lachine, Quebec
Canada H8T 1B3
Telephone +1 (514) 636-6384
FAX +1 (514) 636-1428
http://www.classeaudio.com
email: cservice@classeaudio.com
Classé and the Classé logo are trademarks of Classé Audio Inc. of Lachine, Canada. All rights reserved.
i-Command™ is a trademark of Equity International, Inc. All rights reserved.
AMX® is a registered trademark of AMX Corporation of Richardson, TX. All rights reserved.
Crestron™ is a trademark of Crestron Electronics, Inc. of Rockleigh, NJ. All rights reserved.
HDCD®, the HDCD logo and High Definition Compatible Digital are registered trademarks. Microsoft and
HDCD are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or
other countries. HDCD system manufactured under license from Microsoft Corporation.
20Hz – 20kHz ± 0.1dB
110dB typical
better than 110dB
less than 0.002%
(unweighted, 0dBFS signal, 10Hz – 20kHz)
2Vrms (single-ended)
4Vrms (balanced)
1 balanced (XLR)
1 single-ended (RCA)
0.5V, 75Ω (RCA)
dual differential 24-bit DACs
2 cascaded 1st order Bessel filters
less than 2 picoseconds
CD, CD-R, CD-RW, HDCD
specified on rear panel decal
Width: 17.5" (445mm)
Height: 4.75" (121mm)
Depth: 16.5" (419mm)
352.8kHz
®
30W
29W
26lbs (12kg)
33lbs (15kg)