Main Menu System; Teach Ir - Classe CDP-100 Manuel Du Propriétaire

All manuals and user guides at all-guides.com

main menu system

Pressing the Menu button to the left of the LCD touchscreen brings up a comprehensive
main menu system, the top two levels of which are shown above. This menu system
provides access to many installation-specific features that let you customize how the
CDP-100 works within the context of your particular system.
triggers Each of the CDP-100 trigger outputs may be programmed as to its "logic level," which
is to say, whether its voltage is low (essentially 0V), or high (approximately 12VDC)
when the trigger is activated. The ability to change the level of a trigger's on state can
solve installation-specific problems that otherwise require external devices that add to
both the cost and complexity of your system.
For more information on the use of DC triggers we recommend you speak with your
authorized Classé dealer.
teach IR The CDP-100 provides discrete infrared (IR) command codes for all its functions, a list
that extends far beyond what is required by normal remote controls. However, many of
these functions are critical if you plan to create a customized remote control with macros
that take command of your entire system. Without these discrete codes, many of the
macros you might want to create will simply not work reliably.
The teach IR screen provides a scrolling list of all the available IR codes in the
CDP-100. By scrolling to the command you need to learn into your macro-capable
remote, and then pressing the send IR code button, the CDP-100 will send the
appropriate command code out its front panel—where it can be learned by your third-
party remote control.
For more information on such control systems we recommend you speak with your
authorized Classé dealer.
20