The Remote Control - Classe CDP-100 Manuel Du Propriétaire

All manuals and user guides at all-guides.com
STANDBY
LIGHT INFO DISP
1 2
TIME PROG
3 4 5 6
7 8 9 0
HOME MENU
ENTER
REPEAT A–B STOP
PAUSE PLAY
F1 F2
F3 F4 MUTE

The Remote Control

Your new CD player comes with a versatile remote control which can control both the
CDP-100 itself and several aspects of the rest of a Classé-based system. The keys are
arranged in logical groups according to their functions.
1 Basic Functions
This section along the top of the remote control groups four functions that control
your basic interactions with the CDP-100.
• Light switches the backlighting of the remote control on, for better visibility
under low-light conditions. After a few moments of inactivity, the backlight
switches off automatically.
• Info takes you directly to the status screen in the LCD menu system,
displaying several items of information about the CDP-100 and its current
operational status.
• Disp (for Display) cycles through the three brightness settings of the screen
display.
• Standby toggles the CDP-100 between standby and operate.
2 Numeric Keypad and Programming
The next section down on the remote control provides the numeric keypad for use
in directly accessing particular tracks on the CD you are playing, as well as two
keys that are frequently used in conjunction with the numeric keys.
• The Numeric Keypad can be used to access specific tracks directly from your
remote control. Simply press the appropriate number key (or keys) followed
by the Play key. The CDP-100 will go directly to the track you keyed in and
begin to play. For example, to play track 12, press the 1, 2, and Play keys in
sequence.
• Time cycles through the four time display modes:
time elapsed on track
time elapsed on disc
time remaining on track
time remaining on disc
• Prog (for Program) allows you to quickly and easily create a programmed
sequence of tracks to be played on the current disc. Pressing Prog will take
you directly to the program page of the menu system, regardless of where you
might be.
Once on the program page, you can change the highlighted track using the
Up and Down buttons, and can use the Enter button to toggle whether it
is included in the current program. Pressing Prog a second time returns you
to wherever you had been. (Note that the program function is not available
during play or pause, only when the CDP-100 is in stop.)
15