Cautionary Note On Fkey Use - Classe CDP-100 Manuel Du Propriétaire

All manuals and user guides at all-guides.com
For example, if you use the shuffle mode frequently, you may want to consider
programming one of the Fkeys to toggle that function on and off. Doing so will save
you having to access the control menu, followed by pressing the shuffle button (which
might be hard to see from across the room, even though you could do so from the remote
control with an fkey assignment).
The remote Fkey menu has four buttons, one each for the four Fkeys on your
remote control. Pressing any of these buttons on the LCD touchscreen takes you to a
subordinate, scrolling list of possible functions for that particular Fkey.
Selecting the one you want is as simple as scrolling through the list (by touching either
the up or down arrows on the right), and then touching the specific function in the list
that you want that fkey to perform.
cautionary note on Fkey use Note that all Classé remote controls provide these same four Fkeys, so that you need not
worry about which remote you happen to pick up. Thus F1 on the preamplifier's remote
control sends the same infrared signal as F1 on the CD player's remote control.
While this is intended to minimize confusion amongst different remotes (since this
aspect of them will all perform identically), you should take care when assigning
different functions on different components to the same Fkey. Doing so would result
in two components doing two different things at once, in response to a single press of a
button on the remote control. This can sometimes be useful. As an example, F1 could
set the preamplifier to the CD input, and also set the CD player to Play, both from the
press of a single Fkey.
23