Warranty Card - Profoon TX-160 Mode D'emploi

All manuals and user guides at all-guides.com
POWER SUPPLY:
When batteries have been replaced, the
display shows 12:00. Set the time or
wait for a new call.
After the battery replacing, the Caller-ID
memory is empty. We recommend to
first read the memories prior to change
the batteries.
Do not locate the telephone in direct
sunlight or in a moist environment.
Never use chemical cleansers to clean
the cabinet, the cabinet may only be
cleaned with a moist cloth.
Don't place the TX-160 on furniture with
a cellulose based coating; the rubber
feet will leave stains on the cellulose.
The warranty card is printed on page 36
TIPS & REMARKS
Do not just throw away empty
batteries but hand them over
to your local depot for chemical
waste.
PABX:
In case your PABX is not capable to
pass the Caller-ID signals, than the
TX-160 must be connected directly to
the CO-line.
MAINTENANCE
Under certain circumstances the sound
of the TX-160 might be influenced by
electromagnetic fields of electronic devi-
ces like TV, computer or radio transmit-
ters close to the telephone. Relocate the
telephone to gain better results in such
cases.

WARRANTY CARD

27