General Description - RISCO Group LuNAR DT AM Grade 3 Guide D'installation

General Description

The Industrial LuNAR DT AM Grade 3 is a dual technology ceiling detector with a mounting height of up
to 8.6m (28ft) that incorporates RISCO Group's Anti-Cloak™ Technology (ACT™). The detector has an
Intelligent Digital Signal Processing method that automatically adjusts the alarm threshold and pulse
count verification according to actual intruder crossing speed and environmental factors, providing
superior detection and false alarm immunity.
The Industrial LuNAR DT AM Grade 3 can operate as a regular relay detector connected to any control
panel, or as an addressable BUS detector when connected to RISCO Group's ProSYS control panel via
the RS485 BUS.
Industrial LuNAR DT AM Grade 3 Features
♦
PD6662, EN50131-1, TS50131-2-4 Grade 3
♦
Addressable Dual Technology detector with Anti-Cloak™ Technology
♦
Up to 8.6 m (28ft) mounting height
♦
0
360 by 18m (60ft) diameter coverage pattern
♦
3 independent PIR channels for customized coverage
♦
Intelligent Digital Signal Processing – alarm verification and decision thresholds adjusted
according to actual intruder crossing speed
♦
Built-in Triple EOL resistors, jumper selectable
♦
Active IR for Anti-Masking meeting TS50131 requirements
♦
Ceiling and cover tampers
♦
"Green Line" setting – for disabling the MW when the premises are occupied
♦
Opto–relays for low current consumption and long life
♦
Remote and Local Self Test
♦
Remote SET input
♦
Remote RC control input
♦
PIR coverage optimization by sliding the lenses
♦
Microwave Range Adjustment manually (analog trimmer) and remotely (digital setting)
♦
Trouble Indication (by LEDs or via communication)
♦
3 Triple color LEDs for easy walk testing
♦
Advanced Remote control and diagnostics
♦
Reduced Power Consumption when connected to RISCO Group's ProSYS
2
Industrial LuNAR DT AM Grade 3 Installation Guide