Appliance Description - SilverCrest SHGB 58 A1 Mode D'emploi

Appliance description

(See fold-out page for illustrations)
1 Brush insert with ceramic coating
2 Side heating elements
3 Ion outlets
4 LED display
5
button (switch curl function on/off)
6 + button (increase temperature, activate/deactivate the key lock)
7 ‒ button (reduce temperature)
8 ON/OFF button
9 Hanger
0 Temperature display
q Curl function
w Ion technology
e Key lock
Operation
Switching on/off and setting the temperature
Insert the plug into a mains power socket.
Press and hold the ON/OFF button
the appliance.
appliance starts to heat up.
When you use the appliance for the first time:
Use the +/‒ buttons 6/7 to set the maximum temperature of 210°C for a
few minutes. The temperature display 0 lights up while the appliance is
heating up. As soon as the selected temperature is reached, the temperature
display 0 lights up permanently.
The first time the appliance heats up, a small amount of smoke and smell
may be generated: this is caused by production residues. This is normal and
is completely harmless. Ensure that there is adequate ventilation.
Use the +/‒ buttons 6/7 to set a temperature between 120 and 210°C
in 10°C increments. The temperature display 0 lights up while the appli-
ance is heating up. As soon as the selected temperature is reached, the tem-
perature display 0 lights up permanently.
When you have finished styling your hair, turn off the appliance by pressing
the ON/OFF button
plug. Allow the appliance to cool down completely before storing it.
SHGB 58 A1
(switch the appliance on/off)
8 for approx. 1 second to switch on
(= 150°C) flashes on the temperature display 0; the
8 for approx. 1 second. Then disconnect the mains
GB │ IE │
23 ■