Table des Matières
Publicité
Cleaning the equipment
All variable parts of the refrigerator
compartment can be taken out for
cleaning. (See chapter Variable interior
design".)
Clean the refrigerator
compartment
Taking out the drawers
Fig. w
Tilt drawers forwards and take out.
To insert drawer, place the front of the
drawer on the telescopic rails and push
into the appliance. The drawer is engaged
by pushing it into the appliance.
Remove telescopic rails
Fig. r
1. Pull out the telescopic rail.
2. Push lock in the direction of the arrow.
3. Detach telescopic rail from the rear pin.
4. Push telescopic rail together, push
backwards above the rear pin and
disengage.
Install telescopic rails
1. Place the extended telescopic rail
on the front pin.
2. Pull the telescopic rail forwards slightly
until it engages.
3. Place telescopic rail on the rear pin.
4. Push lock backwards.
Cleaning the cold storage
compartment
Remove the cold storage
compartment drawer
Fig. e
Pull out drawer, lift at rear and take out.
Taking out carrying trays
Fig. 9
Lift carrying trays with the handle and take
out. When inserting the carrying trays,
ensure that the pins are re inserted in the
designated openings.
Removing cold storage compartment
door
Fig. t
1. Remove all four covers.
2. Raise cold storage compartment door
and lift out of mountings.
Note
When installing the cold storage
compartment door, ensure that the rails
are inserted in the rear mountings first.
Light
(LED)
Your appliance features a maintenance
free LED light.
Caution! LED light
Class 1M laser lighting (IEC 60825
Standard). Do not look directly into
the lighting with optical instruments.
Risk of eye injury!
These lights may be repaired by customer
service or authorised technicians only.
en
35
Publicité
Table des Matières
