Cleaning The Equipment; Odours; Lighting - Siemens iQ700 KF86N Série Notice De Montage Et D'utilisation

Cleaning the equipment

To clean, take the variable parts out of the appliance.
~ "Interior fittings" on page 36
Glass plate partition
Remove the glass plate:
Reach into the back of the recess, lift the glass plate
1.
and push right back.
Reach into the front of the recess, lift the glass plate
2.
at the front and remove.
Install the glass plate:
Place the glass plate on the partition and push right
■
to the front.
Glass plate drawer
Remove the glass plate:
Open the drawer as far as it will go and remove the
1.
container.
Lift the glass plate at the front and remove.
2.
Install the glass plate:
Place the glass plate on the rail guide at the rear and
■
tilt forwards.
Cool-fresh container cover
Remove the cover:
Open the drawer as far as it will go and remove the
1.
container.
Lift the cover at the front and remove.
2.
Install the cover:
Slide the lid symmetrically backwards in the com-
1.
partment at the top and hook into place.
Push the cover up and engage.
2.
lOdours
I f you experience unpleasant odours:
O d o u r s
Pull out the mains plug or switch off the fuse.
1.
Take all food out of the appliance.
2.
Clean the inside.~ "Cleaning" on page 46
3.
Clean all packages.
4.
Seal strong smelling food in order to avoid odours
5.
from forming.
Switch the appliance on again.
6.
Store food in the appliance.
7.
Check whether the formation of odours is still occur-
8.
ring after 24 hours.

9 Lighting

Y our appliance features a maintenance-free LED light.
L i g h t i n g
Only customer service or authorised technicians may
repair the light.

Odours

en
47