en
Fault
Appliance is not cooling,
temperature display
lamps and interior light
are lit.
The interior light is not
The interior light is not
functioning.
functioning.
Temperature display
lights are flashing.
Fig. 2/4
Customer service
Please check your telephone book or the
customer service list for your nearest
customer service facility. When
contacting customer service, please
ALWAYS quote the product number
(E number) and production number
(FD number) of your appliance.
38
Possible cause
Showroom mode is switched on.
The LED light is defective.
Door was open too long.
Light switches off after
approx. 10 min.
Appliance door opened frequently.
A lot of food was placed in the
appliance.
Remedial action
Hold down Alarm button, Fig. 2/1,
for 10 seconds until an
acknowledgement signal sounds.
After a short time check whether
your appliance is cooling.
See chapter Light (LED)" section.
When the door is closed and
opened, the light is on again.
Do not open the door unnecessarily.
Switch on Super cooling before
placing food in the appliance.
These numbers can be found on the
rating plate. Fig. z
To prevent unnecessary call outs, please
assist customer service by quoting the
product and production numbers. This
will save you additional costs.