Further Functions - HumanTechnik signolux Mode D'emploi

Further functions

13. Checking the last signal, deleting
the current signal
Shortly pressing the memory button ● (fig. 6)
the last registered signal can be displayed
again.
You can also "delete" a signal that was just
activated by pressing this button.
14. AUX-jack and power connector
The »AUX«-jack and the connector for the
»signolux« power adapter (Item number
A-2690-0, available as accessory) can be
found on the right side of the receiver.
All Humantechnik modules can be connec-
ted to the AUX-jack (vibrating pillow etc,
available as accessories)
Figure 8: Lateral connectors
Mounting
Important note: Kindly keep in mind that
metal parts and other building materials
may interfere with the transmission of the
radio signal. As they can be either visible
or hidden at the desired mounting location
you should always carry out a functional test
at the mounting location before starting the
All manuals and user guides at all-guides.com
AUX-jack
Connector for
power adapter
6 V
mounting process, and, if required, choose
a different mounting or installation location if
the reception is not guaranteed.
15. Mounting the doorbell pushbutton
You can mount the doorbell pushbutton us-
ing the supplied strips of double-sided tape
or the supplied set of screws.
16. Mounting the »signolux« receiver
The »signolux« receiver is suited either for
free-standing installation or it can also be
mounted using the supplied wall mount.
To use it, fix the wall mount onto a wall (or
rafter, cupboard etc.) When mounting onto a
brick- or stone wall, you may need a power
drill and stone bit to do so. Use the supplied
wall plugs in this case. Once fixed, hang
the »signolux« receiver onto the wall mount
bracket.
Figure 9: Wall mount
English 17