Hazard Definitions - PRO-POINT 105I Manuel D'utilisateur

8958696
Specifications
PRO.POINT 105I MIG
GAS/FLUX-CORED WELDER
SPECIFICATIONS
Input Voltage
Output Current Range
Max. Amperage Draw
MIG Welding Output @ 20% Duty Cycle
AC/DC Output
No-Load Voltage
Welding Capacity
Wire Feed Speed
Welding Wire Diameter
Welding Wire Type
Welding Gas
Insulation Class
Power Factor
Dimensions (L x W x H)
Generator Compatible
Weight
INTRODUCTION
The Pro.Point 105i MIG Gas/Flux-Cored Welder incorporates the latest in IGBT technology for
maximum efficiency and longer duty cycles. The welding unit has both a gas and gasless option.
The wire feed speed is automatically calibrated based on the wire size and Synergic control
knob settings.
SAFETY
WARNING! Read and understand all instructions before using this tool. The operator must follow
basic precautions to reduce the risk of personal injury and/or damage to the equipment.
Keep this manual for safety warnings, precautions, operating or inspection and maintenance
instructions.

HAZARD DEFINITIONS

Please familiarize yourself with the hazard notices found in this manual. A notice is an alert that
there is a possibility of property damage, injury or death if certain instructions are not followed.
DANGER! This notice indicates an immediate and specific hazard that will result in severe
personal injury or death if the proper precautions are not taken.
WARNING! This notice indicates a specific hazard or unsafe practice that could result in
severe personal injury or death if the proper precautions are not taken.
CAUTION! This notice indicates a potentially hazardous situation that may result in minor or
moderate injury if proper practices are not taken.
2
PRO.POINT 105I MIG GAS/FLUX-CORED WELDER
115VAC
40 to 105A
26.5A
105A
DC
46V
3/16 in. Mild Steel and Stainless Steel
Automatic
0.023 / 0.030 / 0.035 in.
FCAW: AWS E71T-GS and GMAW: AWS ER70S-6
Argon, Argon & CO2 mix, or CO2 (requires adapter)
B
0.74
14 x 5.2 x 9.85 in.
No
13 lb
For technical questions call 1-800-665-8685
V1.1