Table des Matières
Publicité
5• Make sure that the LUAS strap is
threaded flat against the base.
6• Tighten the base against the seat
by pulling the free end of the LUAS
strap. Press down on the base with
your body weight and tighten
further. Check the level indicator. If
the pointer has moved outside of the
green area, turn the knob until the
pointer is back within the green area.
You may need to loosen the strap
slightly to do this. Push and pull on
the base. If you can move it more
than 2,5 cm (1 inch), tighten the belt
further.
• Now that you have installed the
base, go to page 23.
16
Publicité
Table des Matières
