General Information; Intended Use - Wohler KM 410 Mode D'emploi

1

General Information

1.1 Operation Manual
Information
1.2 Notes
1.3

Intended Use

1.4 Important note
This operation manual allows you to safely work
with the Wöhler KM 410 IAQ Meter. Please keep
this manual for your information.
The Wöhler KM 410 IAQ Meter should be em-
ployed by professionals for its intended use only.
Liability is void for any damages caused by not
following this manual.
ATTENTION!
Not following this note can cause permanent
damage to the meter.
NOTE!
Useful information
The meter verifies HVAC system performance
and air ventilation control. It measures the CO
level, the air temperature and the relative humidi-
ty. Furthermore it determines the CO content, the
dew point and the wet bulb temperature.
NOTE!
For a humidity measurement with the specified
accuracy, it is necessary to calibrate the humidity
sensor before switching the unit on. To do so, use
the two calibration salts supplied (33% rH and
75% rH), see chapter 12.2.
General Information
2
EN
37