Overview Of Configuration Menu - Kessel Staufix FKA Instructions D'installation Et D'utilisation

Maintenance interval
► Entry of the maintenance interval specified in the stan-
dard.
Initialisation is completed, control unit is ready for use.
The first time pressing of the OK button activates control
mode at the control unit. (The display lights up).
Check whether error messages are displayed.
If no error messages are displayed, the control unit is
ready for operation.
Continue as described in the system instructions.
5.4

Overview of configuration menu

Overview menu
The control menu is split into four menu areas:
0 System info - selected system, configured sensors, cur-
rent measured values; if applicable, events or error mes-
sages
1 Information - display of the operating data (e.g. voltage,
current measured values, logbook or set parameters)
2 Maintenance - maintenance-relevant tasks (e.g. switch
pump(s) on/off), self-diagnosis, maintenance date and inter-
val)
46 / 164
(1) Number of the menu item
016-003