Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
4
Installation
4.1
Installing the control unit
Select installation position taking the following into
account:
There is a safety socket in the direct vicinity of the con-
trol unit.
The control unit can be fastened safely and suffi-
ciently.
Fit all fastening screws (L=168mm, drilling template
included in the scope of delivery). In doing so, ensure that
the distance (A) between the screw heads and the fasten-
ing surface is approx. 3 to 4 mm.
Hang the control unit on the fastening screws and press
downwards gently. (1)
36 / 164
016-003
Publicité
Table des Matières
