Technical Specifications - Novus J-214 Li-Ion Mode D'emploi

1
1.5

Technical specifications

Cordless tacker
• Rated voltage: 3.6 V DC
• Pulse repetition rate: maximum of
30 shots / min, S2 30 min
• Temperature range: 0°C to 40°C
• Dimensions: 196 mm high, 196 mm long,
53 mm wide
• Weight: 962 g
• Noise emissions:
measured in accordance with EN 60745-1
A-weighted sound pressure level
L = 80 dB(A); uncertainty K
pA
A-weighted sound power level
L = 91 dB(A); uncertainty K
WA
Wear ear protection!
• Vibration:
Total vibration value measured
in accordance with EN 60745-1
Total vibration value measured
in accordance with EN 60745
Vibration emission value ah = 2.5 m/s
uncertainty K = 1.5 m/s
Rechargeable battery
• Characteristic values: 3.6 V DC;
Li-Ion (lithium-ion); 1300 mAh; 4.68 Wh
We reserve the right to make technical modifications and improvements in the interest of advancing our products.
12 / 96
3 dB(A)
pA =
3 dB(A)
wa =
2
;
2
Charger
• Rated voltage:
Input: 100V - 240V AC 50/60 Hz;
Output: 5 V DC 600 mA
• Temperature range: 0°C to 40°C
• Weight (power supply unit ): 61 g
• The total vibration value stated and the noise
emission level stated were measured on the
basis of a standardised testing method and
can be used for comparing one power tool with
another.
• The total vibration value stated and the noise
emission level stated can also be used for mak-
ing a preliminary estimate of load.
Warning:
• While actually using the power tool, vibration
and noise emissions may vary from the values
stated. This will depend on the way in which
the power tool is used, in particular the type of
workpiece it is being used for.
• To protect the operator, define additional safety
measures based on an estimate of vibration
load under actual operating conditions (tak-
ing into account all parts of the operating
cycle, such as cycles in which the power tool is
switched off, and cycles in which it is switched
on but not operating under load).