Pictogram Legend - Novus J-214 Li-Ion Mode D'emploi

1
• As the tacker is only rated for short-time duty,
it should be allowed to cool down after 30
minutes when fired at a rate of 20 shots/min. in
single-stroke mode, and after 4 min. when used
in multiple-stroke mode.
• Clean the device with a soft paintbrush as ne-
cessary.
1.4

Pictogram legend

Read user information/
safety precautions
ATTENTION
Disconnect device from power
supply
Wear eye and hearing protection
Important information
Normal operation
J-214 Li-Ion
• Unplug the device after you finish working with
it. Do not leave the device unattended while it
is connected to the power supply.
• After approximately every 1000 shots, lubricate
the staple outlet with a drop of light oil.
• The device must only be opened by trained
service personnel.
Maintenance information /
troubleshooting
Connect device to power supply
Conformity with applicable
EU safety directives
Intertek certifies that the
product complies with the
German Equipment and
Product Safety Act .
Protection class II (double
insulation, no earthed plug
required.)
Do not dispose of as household
waste.
11 / 96